Bảng công tắc điều khiển cảm biến nhiệt kỹ thuật số W1209 chất lượng cao
44.000
₫ 42.449
Sản phẩm Bảng công tắc điều khiển cảm biến nhiệt kỹ thuật số W1209 chất lượng cao đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 44.000 xuống còn ₫ 42.449, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Feature:
1. 100% complete hine patch, wave soldering, stable performance, good consistency.
2. Embedded Central Processor Unit (MCU), Smart and Lower Power Consumption.
3. Power off setting automatic memory (MCU built-in EEPROM memory unit).
4. Control accuracy 0.1 degrees Celsius.
5. Set the setba from 0.1 to control decimal (0.1-15.0).
Specification:
Display color: red, blue (optional)
Temperature Control Range: -30℃-110℃
Resolution: -9.9-99.9 at 0.1℃ other temperature range at 1℃
Accuracy of temperature measurement: 0.1 ℃
Control accuracy: 0.1 ℃
Balash accuracy: 0.1 ℃
Refresh frequency: 0.5S
Input power: DC 5V, DC 12V, DC 24V
Measurement input: NTC (10K 0.5%) waterproof sensor
Output: 1 relay output, capacity = 20A 125VAC, 20A 14VDC
Environmental requirements: - 10℃ - 60℃ humidity 20% - 85%.
Product size: 48.5*40mm/1.9*1.57''
Power Consumption: Static Current: ≤10mA Absorption Current: ≤65mA
Line length: 50cm/19.68''
Product size: 50mm*40mm*10mm/1.96*1.57*0.39''
Paing weight: 22g
Operation Manual:
1. Connect the power supply and equipment, you can supply power for the controller. At this time, it is displayed as measuring temperature, press SET key once, display screen temperature fliers, press + - to set the required temperature (hold + - can quily rise and fall) and then confirm return by SET after setting.
2. At this time, the controller automatically executes relay on and off according to setting. The output of the thermostat is 20A relay, which satisfies all kinds of high-power loads.
3. If the control circuit is well connected, the thermostat can be supplied with power. At this time, the display screen shows the ambient temperature.
Indicator Lamp, Digital Tube and Buzzer Status Description:
1. Indicator lamp: flier indicates delay in starting refrigeration or heating, and constant light indicates that relay is closed.
2. Digital tube: display LL to open the circuit for the sensor, please connect the sensor according to the instructions; display HH to exceed the measurement range temperature controller will forcibly disconnect the relay; display - alarm for high temperature.
Parametric Function:
Long press SET for 5 seconds can enter the main menu settings, press +-switch P 0... P 6, long press SET or 10 seconds keyless action controller to automatically confirm return.
P0 Refrigeration and Heating Mode:
1. Long press SET 5 seconds to display P0, press SET once to set working mode, press + - switch (H is heating mode) (C is refrigeration mode), press SET once to return, press SET or 10 seconds to confirm automatically.
2. Refrigeration mode: when the temperature measurement value is greater than or equal to the temperature setting point, the refrigeration relay will su in and the refrigera will start; when the temperature measurement value is less than the temperature setting point-balash, the refrigeration relay will be disconnected and the refrigera will be off.
3. In heating mode: when the temperature measurement value is le
1. 100% complete hine patch, wave soldering, stable performance, good consistency.
2. Embedded Central Processor Unit (MCU), Smart and Lower Power Consumption.
3. Power off setting automatic memory (MCU built-in EEPROM memory unit).
4. Control accuracy 0.1 degrees Celsius.
5. Set the setba from 0.1 to control decimal (0.1-15.0).
Specification:
Display color: red, blue (optional)
Temperature Control Range: -30℃-110℃
Resolution: -9.9-99.9 at 0.1℃ other temperature range at 1℃
Accuracy of temperature measurement: 0.1 ℃
Control accuracy: 0.1 ℃
Balash accuracy: 0.1 ℃
Refresh frequency: 0.5S
Input power: DC 5V, DC 12V, DC 24V
Measurement input: NTC (10K 0.5%) waterproof sensor
Output: 1 relay output, capacity = 20A 125VAC, 20A 14VDC
Environmental requirements: - 10℃ - 60℃ humidity 20% - 85%.
Product size: 48.5*40mm/1.9*1.57''
Power Consumption: Static Current: ≤10mA Absorption Current: ≤65mA
Line length: 50cm/19.68''
Product size: 50mm*40mm*10mm/1.96*1.57*0.39''
Paing weight: 22g
Operation Manual:
1. Connect the power supply and equipment, you can supply power for the controller. At this time, it is displayed as measuring temperature, press SET key once, display screen temperature fliers, press + - to set the required temperature (hold + - can quily rise and fall) and then confirm return by SET after setting.
2. At this time, the controller automatically executes relay on and off according to setting. The output of the thermostat is 20A relay, which satisfies all kinds of high-power loads.
3. If the control circuit is well connected, the thermostat can be supplied with power. At this time, the display screen shows the ambient temperature.
Indicator Lamp, Digital Tube and Buzzer Status Description:
1. Indicator lamp: flier indicates delay in starting refrigeration or heating, and constant light indicates that relay is closed.
2. Digital tube: display LL to open the circuit for the sensor, please connect the sensor according to the instructions; display HH to exceed the measurement range temperature controller will forcibly disconnect the relay; display - alarm for high temperature.
Parametric Function:
Long press SET for 5 seconds can enter the main menu settings, press +-switch P 0... P 6, long press SET or 10 seconds keyless action controller to automatically confirm return.
P0 Refrigeration and Heating Mode:
1. Long press SET 5 seconds to display P0, press SET once to set working mode, press + - switch (H is heating mode) (C is refrigeration mode), press SET once to return, press SET or 10 seconds to confirm automatically.
2. Refrigeration mode: when the temperature measurement value is greater than or equal to the temperature setting point, the refrigeration relay will su in and the refrigera will start; when the temperature measurement value is less than the temperature setting point-balash, the refrigeration relay will be disconnected and the refrigera will be off.
3. In heating mode: when the temperature measurement value is le
Sản Phẩm Liên Quan
HOT