Bản Mạch Mở Rộng Tft / Sd Shield Dành Cho Arduino Due Lcd Card Adapter
205.800
₫ 163.600
Sản phẩm Bản Mạch Mở Rộng Tft / Sd Shield Dành Cho Arduino Due Lcd Card Adapter đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 205.800 xuống còn ₫ 163.600, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Description:
-TFT lcd at a much faster speed using 84 MHz Ardiuno due
-The shield directs all LCD data contacts to the PC1-PC8 and PC12-19 ports, control contacts to the PD0-PD3, this design can provide a high data rate (three cycles per strobe recording on the LCD display) for maximum LCD speed display
-SPI interface (for SD or flash control) is the path to the ISP header for Arduino Due to provide high-speed SPI transmission with DMA
The screen is compatible with Arduino Due and the following LCD:
2.2" TFT LCD Module (220x176)
2.8" TFT LCD Module (320x240)
3.2" TFT LCD Module with Microphone (320x240)
3.2" high resolution TFT LCD module and IC (480x320)
3.5" TFT LCD module with microphone (480x320) (full viewing angle IPS panel)
4.0" TFT LCD Module with Microphone (480x320)
4.3" TFT LCD Module with Microphone (480x272)
5.0" TFT LCD Module with Microphone (800x480)
7.0" TFT LCD Module with Microphone (800x480)
Features:
-TFT lcd drive for Arduino Due, simply connected to the Arduino Due main board, without flying wires
-Compatible with 40-pin version LCD display, which is widely used in thin-film transistors on thin-film transistors due to shield
-Also comptabile with 32-pin LCD, which is widely used in STM32 breadboard
-mini sd card with adjustable CS selection
-On the SPI flash footprint with an adjustable CS selection, the IC font for drawing text on the LCD display is included in the update, and also supports the SPI Flash library
6. 3.3V and 5V LCD display selectable via solder jumpers
-LCD backlight (LEDA +) 3.3 V, 5 V or PWM is selected via solder jumpers
-Contacts are sent to reduce CPU cycles, faster display speeds.
Package:
1 x TFT/SD Shield Expansion Board For Arduino Due LCD M
-TFT lcd at a much faster speed using 84 MHz Ardiuno due
-The shield directs all LCD data contacts to the PC1-PC8 and PC12-19 ports, control contacts to the PD0-PD3, this design can provide a high data rate (three cycles per strobe recording on the LCD display) for maximum LCD speed display
-SPI interface (for SD or flash control) is the path to the ISP header for Arduino Due to provide high-speed SPI transmission with DMA
The screen is compatible with Arduino Due and the following LCD:
2.2" TFT LCD Module (220x176)
2.8" TFT LCD Module (320x240)
3.2" TFT LCD Module with Microphone (320x240)
3.2" high resolution TFT LCD module and IC (480x320)
3.5" TFT LCD module with microphone (480x320) (full viewing angle IPS panel)
4.0" TFT LCD Module with Microphone (480x320)
4.3" TFT LCD Module with Microphone (480x272)
5.0" TFT LCD Module with Microphone (800x480)
7.0" TFT LCD Module with Microphone (800x480)
Features:
-TFT lcd drive for Arduino Due, simply connected to the Arduino Due main board, without flying wires
-Compatible with 40-pin version LCD display, which is widely used in thin-film transistors on thin-film transistors due to shield
-Also comptabile with 32-pin LCD, which is widely used in STM32 breadboard
-mini sd card with adjustable CS selection
-On the SPI flash footprint with an adjustable CS selection, the IC font for drawing text on the LCD display is included in the update, and also supports the SPI Flash library
6. 3.3V and 5V LCD display selectable via solder jumpers
-LCD backlight (LEDA +) 3.3 V, 5 V or PWM is selected via solder jumpers
-Contacts are sent to reduce CPU cycles, faster display speeds.
Package:
1 x TFT/SD Shield Expansion Board For Arduino Due LCD M