Dây Cáp Chuyển Đổi 8 Pin Male Sang 8 Pin (6 + 2) Male Pcie Cho Dell T3600 T3610 T5600 T5610 T7600 T7610 T5810 / 7810,30cm

PCIe 8P - Dual 8P(6+2): PCIe 8 pin male end to plug into the power connector of motherboard and two 8 pin(6+2) male ends (The 8 pin (6+2) ends could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.) to plug into the video graphics card.(NOTE: the 8 pin end and two 8 pin(6+2) male ends cannot be used interchangeably);
Compatibility: Compatible with for Dell T3600 T3610 T5600 T5610 T5610 T7600 T7610 5810 T5810 T7810 T7910;
Compatibility: Compatible with 6-pin & 8-pin graphics cards from popular manufacturers such as: for ASUS, for ASRock, for Gigabyte, for Radeon, for Sapphire, for NVIDIA Tesla GPU, etc. (The 8 pin (6+2) ends could be used as 6 pin or 8 pin end by sliding on/off the 2 pin.);
Note: This cable was only designed for some types of for Dell motherboard as listed in point 2nd, not compatible with other motherboards or PSUs. If you use other incompatible brand motherboards or PSUs, it will definitely burn or damage the motherboards, PSUs or graphics cards and we won't take any responsibility for wrongly using or installing.

Note:
1.Please check the specifications of your graphics card and PSU for power requirements when to use this cable.
2.PCle male connector with a latch provide a safe connection to prevent acci disconnection.Please depress the button before unplugging;
3.This cable was only designed for graphics vedio cards, it does not work with motherboards;
4.This cable was only designed for some types of for Dell motherboard as listed, not compatible with other motherboards or PSUs;
5.Do not plug the cable into wrong direction or connector;
Material:18AWG pure copper tinned wire
colour:Black+yellow

Package Contents:
1 x PCIe Power Adapter CableOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1