3D Printer Parts 4PCS Stepstick TMC2208 Stepper Motor Driver Super Silent with New Heat Sinks Replace TMC2100
₫ 573.209
Sản phẩm 3D Printer Parts 4PCS Stepstick TMC2208 Stepper Motor Driver Super Silent with New Heat Sinks Replace TMC2100 đang được mở bán với mức giá siêu tốt khi mua online, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
How to use the app:1. When used on the printer control board, please keep the jumper cover three below the socket.
2. Pay attention to the direction, see the image below.
3. The heat sink connected directly to the pcb, but please pay attention to the direction of the heat sink, otherwise it will cause the heat sink and the pin together and lead to a short circuit, see the picture below.
4. Motor direction is opposite to a4988 and drv8825, please adjust the firmware or adjust motor wiring if you want to change a4988. And if you use the lerdge motherboard, please set the steering directly on the engine steering setting page.
Description:
Compared to the tmc2100 stepper motor driver module, the tmc2208 driver module is of lower heat. The heat of tmc2208 at 0.8a with the equivalent effect of heat tmc2100 at 0.5a, can be used interchangeably with tmc2100.
Current drive algorithm and regulation:
1. verf measures the voltage of half gnd and the potentiometer.
2. Please do not connect motors when measuring voltage, or it is easy to burn the unit.
3. connect the power supply while measuring voltage too, don't just connect usb power.
Colour:Blue
Material:ABS + metal
Size:About 2*2*2cm
Package Contents:
4 * TMC2208 driver
4 * heat sink
1 * Screwdriver
Please pay special attention to the steering, do not enter wrong !!!Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
2. Pay attention to the direction, see the image below.
3. The heat sink connected directly to the pcb, but please pay attention to the direction of the heat sink, otherwise it will cause the heat sink and the pin together and lead to a short circuit, see the picture below.
4. Motor direction is opposite to a4988 and drv8825, please adjust the firmware or adjust motor wiring if you want to change a4988. And if you use the lerdge motherboard, please set the steering directly on the engine steering setting page.
Description:
Compared to the tmc2100 stepper motor driver module, the tmc2208 driver module is of lower heat. The heat of tmc2208 at 0.8a with the equivalent effect of heat tmc2100 at 0.5a, can be used interchangeably with tmc2100.
Current drive algorithm and regulation:
1. verf measures the voltage of half gnd and the potentiometer.
2. Please do not connect motors when measuring voltage, or it is easy to burn the unit.
3. connect the power supply while measuring voltage too, don't just connect usb power.
Colour:Blue
Material:ABS + metal
Size:About 2*2*2cm
Package Contents:
4 * TMC2208 driver
4 * heat sink
1 * Screwdriver
Please pay special attention to the steering, do not enter wrong !!!Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000