1 Pcs 2X15W Dual-Channel Stereo Digital Power Amplifier Board ule & 1 Pcs 3D Printer Mos ule
445.000
₫ 312.000
Sản phẩm 1 Pcs 2X15W Dual-Channel Stereo Digital Power Amplifier Board ule & 1 Pcs 3D Printer Mos ule đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 445.000 xuống còn ₫ 312.000, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
1 pcs Amplifier Board ule & 1 pcs Mos ule
It can be controlled by 5-24v digital signal.MOS tube with excellent performance.
Large heat sink, the maximum current can reach more than 30A.
You can directly use the hot bed output signal control of Ramp1.4 and MKS series motherboards
Power a big heat elements without damage your expensive controlboard.
amplifier ule:
el: ZK-152H
Chip: TPA3110D2
Adapter power supply: 9-24V
Adapted speakers: 5-30W, 4-16 ohms
Number of channels: 2
Name: 2 x 15W Bluetooth 5.0 digital power amplifier ule
colour:Black
Material:plastic
size:55 x 34 x 14mm
MOS ule:
Instructions:
1. Connect Power to the power supply, pay attention to the positive and negative.
2. Connect Hotbed to the heating line of the hot bed, pay attention to the positive and negative.
3. Direct digital control signal
4. Connect -Bed+ to the control signal output from Ramps1.4 or MKS motherboard MOS tube.
5. Two sets of control signals can only be connected to one set.
size:9x6.6x3.2cm
Material:PC+metal
colour:Red+black
Package Contents:
1 x Power amplifier ule
1 x MOS uleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
It can be controlled by 5-24v digital signal.MOS tube with excellent performance.
Large heat sink, the maximum current can reach more than 30A.
You can directly use the hot bed output signal control of Ramp1.4 and MKS series motherboards
Power a big heat elements without damage your expensive controlboard.
amplifier ule:
el: ZK-152H
Chip: TPA3110D2
Adapter power supply: 9-24V
Adapted speakers: 5-30W, 4-16 ohms
Number of channels: 2
Name: 2 x 15W Bluetooth 5.0 digital power amplifier ule
colour:Black
Material:plastic
size:55 x 34 x 14mm
MOS ule:
Instructions:
1. Connect Power to the power supply, pay attention to the positive and negative.
2. Connect Hotbed to the heating line of the hot bed, pay attention to the positive and negative.
3. Direct digital control signal
4. Connect -Bed+ to the control signal output from Ramps1.4 or MKS motherboard MOS tube.
5. Two sets of control signals can only be connected to one set.
size:9x6.6x3.2cm
Material:PC+metal
colour:Red+black
Package Contents:
1 x Power amplifier ule
1 x MOS uleOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000