1 Mô Đun Chuyển Đổi Pl2303 Pl2303Hx Usb Sang Uart Ttl 4p 4 Pin Rs232
66.230
₫ 46.361
Sản phẩm 1 Mô Đun Chuyển Đổi Pl2303 Pl2303Hx Usb Sang Uart Ttl 4p 4 Pin Rs232 đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 66.230 xuống còn ₫ 46.361, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Note: Setting 3.3V and 5.0V output (this is the power to the microcontroller, the need to upgrade the machine) Please pull out the small plate from the computer, set the jumper to take, do not charge it to avoid damage to the device.
Pin connection and description:
Connector pin assignments before you must find, especially GND must not be connected to the voltage pin, and RX and TX side do not connected to the VCC pin, the (actual measurement had some VCC pin voltage up to 14V.) Wrong shall be burnt chip adapter cable, be sure to note, do not take their own small board to do the experiment, otherwise we are not responsible for any burn. We must find a good pin definitions in the access.
Connection method: Again Brush only need three lines, generally used only RX TX GND three signal lines, VCC no connection. The above is 4,5 needles friends, not to VCC and BT needle. Please use the RXD and target board TX phase, TXD and target board RX phase, GND connection GND, if not, were reversed RX and TX.
Connection:
RX for TX;
TX to RX;
Ground-ground (GND to GND)
Black cable-----GND
Green cable----TXD
White cable----RXD
Red cable -----VCC(5V)
Driver link:
https://www.adrive.com/public/kRPsVm/k000306%20driver
USB to serial platelet function:
1.simple serial communication.
2.or ADSL router firmware upgrade.
3.GPS serial communication.
4.hard drive firmware upgrade.
5.easy to use, RX received the MCU TX; TX RX received at the MCU connected to ground. Without the need for conversion MAX232.
6.Super Terminal in use; common serial debugging tools.
7.upgrade with a variety of satellite machine.
Feature:
USB TO RS232 TTL PL2303HX AUTO CONVERTER MODULE ADAPTER 5V OUTPUT, PROVIDES THE BEST AND CONVENIENT WAY TO CONNECT YOUR RS232 TTL DEVICES OR DEMO BRD. TO YOUR COMPUTER, VIA THE USB PORT.
Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your designs
Available for Linux, WinCE and Windows (XP, 2003), Vista, Win 7
Package included:
1 x PL2303 PL2303HX USB to UART TTL Cable Module 4p 4 pin RS232 Converter
Packed Safely in Bubble Bag.
#PL2303HX USB to UART TTL Cable M
Pin connection and description:
Connector pin assignments before you must find, especially GND must not be connected to the voltage pin, and RX and TX side do not connected to the VCC pin, the (actual measurement had some VCC pin voltage up to 14V.) Wrong shall be burnt chip adapter cable, be sure to note, do not take their own small board to do the experiment, otherwise we are not responsible for any burn. We must find a good pin definitions in the access.
Connection method: Again Brush only need three lines, generally used only RX TX GND three signal lines, VCC no connection. The above is 4,5 needles friends, not to VCC and BT needle. Please use the RXD and target board TX phase, TXD and target board RX phase, GND connection GND, if not, were reversed RX and TX.
Connection:
RX for TX;
TX to RX;
Ground-ground (GND to GND)
Black cable-----GND
Green cable----TXD
White cable----RXD
Red cable -----VCC(5V)
Driver link:
https://www.adrive.com/public/kRPsVm/k000306%20driver
USB to serial platelet function:
1.simple serial communication.
2.or ADSL router firmware upgrade.
3.GPS serial communication.
4.hard drive firmware upgrade.
5.easy to use, RX received the MCU TX; TX RX received at the MCU connected to ground. Without the need for conversion MAX232.
6.Super Terminal in use; common serial debugging tools.
7.upgrade with a variety of satellite machine.
Feature:
USB TO RS232 TTL PL2303HX AUTO CONVERTER MODULE ADAPTER 5V OUTPUT, PROVIDES THE BEST AND CONVENIENT WAY TO CONNECT YOUR RS232 TTL DEVICES OR DEMO BRD. TO YOUR COMPUTER, VIA THE USB PORT.
Built-in TTL COM PC-PL2303HX Chip
Standard USB type A male and TTL 4 pin connector
Cable length: 1000mm (39 3/8 in)
Simple and Easy way to give USB support to your designs
Available for Linux, WinCE and Windows (XP, 2003), Vista, Win 7
Package included:
1 x PL2303 PL2303HX USB to UART TTL Cable Module 4p 4 pin RS232 Converter
Packed Safely in Bubble Bag.
#PL2303HX USB to UART TTL Cable M
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000