1 Công Tắc Điều Khiển Rèm Cửa 9 Kênh Rf433

1. 9 Channel RF433 frequency remote is designed for separately controlling our curtain switch and curtain switch ule in a much easier way with its maximum controllable quantity of nine;easily achieve another control to the whole house curtains without interference after successfully paired,especially suitable for the old.
2. Extremely simple matching way supported for simple use.You need to pair the three button(up,down,stop)one by one to the curtain switch or switch ule for correct control.With the new added set button for easy channel settings.
3. Encoding 1527 required for the remote.No other codes available for this curtain control system,Please confirm before buying
4. Battery powered:23A*12V battery required for this remote with long time standby.(With matching battery)
1. Channel setting
Press 'set', digital tube flashes for setup e.
Press ' less than more than ' in setup e, channel increases. When the channel value increases to 8, press the key again to start increasing from 0
Press ' more than less than ' in setup e, channel value decreases. When the channel value decreases to O, press the key again to start decreasing from 8.
Press 'set' in setup made, the digital tube stops flashing for exiting setup e
2. Transmit code Press any key among ' less than more than ' '=' ' more than less than ' non-setup e, then remote starts to transmit signal, the red indicator in the right corner flashes fast to indicate it is transmitting. Release the key to stop transmitting and the digital tube stops lighting.
Specifications:
Working voltage:DC12V
Working temperature:-20℃ - +60℃
Encoding e:Imitation learning code
Working frequency:433.92MHz
Working current: less than or equal to 16mA
Number of channel:9
Colour: White
Material: ABS
Size: 37 x 110mm

Package Contents:
1 x Remote Control
/
2 x Remote Control
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1