1 Chiết Áp Không Chổi Than 7v-24v 20a Esc Cho Máy Bơm Nước
331.000
₫ 298.100
Sản phẩm 1 Chiết Áp Không Chổi Than 7v-24v 20a Esc Cho Máy Bơm Nước đang được mở bán với mức giá siêu tốt khi mua online, Vừa được giảm giá từ 331.000 xuống còn ₫ 298.100, giao hàng online trên toàn quốc với chi phí tiết kiệm nhất,0 đã được bán ra kể từ lúc chào bán lần cuối cùng.Trên đây là số liệu về sản phẩm chúng tôi thống kê và gửi đến bạn, hi vọng với những gợi ý ở trên giúp bạn mua sắm tốt hơn tại Pricespy Việt Nam
Specification:
- Item name:speed regulation potentiometer / ESC Module
- Voltage:7V-24V
- Rated continuous current:12A
- With well cooling,the the max current should be 20A
- Maximum speed: 224000 RPM (2-pole motor), 74000 RPM (6-pole motor), 40000 RPM (12-pole motor), 35000RPM (14-pole motor).
Features:
ESC is specially designed for all kinds of industrial control electric tools such as air pump, water pump, oil pump and fan which use DC three-phase brushless motor. The default medium angle and long time high current work, Jianyi plus fan cold has overheat protection When the external heat dissipation condition of the ESC is poor, the temperature is automatically reduced when the temperature exceeds 100 degrees, and the temperature drops to 100 degrees to return to normal.
Interface Description:
-U V W phase line output is connected to the motor
-VCC GND main power supply (external DC power supply)
Instructions for use:
Standard power distribution positioner directly adjusts the speed without external signal. Clockwise increase and counterclockwise decrease. It is also suitable for external PLCO-5 analog quantity control, unplug the potentiometer cable, and external 0-5 analog quantity control The control signal and the ground wire are respectively connected to the input signal terminal of the brushless drive board, as long as two wires are required
Note:
-There is no fuse in the power supply circuit on the main board, it is recommended to add an external power supply.Reversed polarity will cause permanent damage to some chips on the board
-There is motor blocking protection during normal operation, due to the power of the module.The current is very large. Please do not artificially short-circuit when the module is not working normally.
Short circuit may burn the line and burst the tube. Please use small electricity for the first wiring test.Flow low voltage test, after test passes, then pass high current and high voltage to work
-Don't connect or connect which is obviously inconsistent with the voltage, current and power of the drive module.
Package include:
1pc x ESC M
- Item name:speed regulation potentiometer / ESC Module
- Voltage:7V-24V
- Rated continuous current:12A
- With well cooling,the the max current should be 20A
- Maximum speed: 224000 RPM (2-pole motor), 74000 RPM (6-pole motor), 40000 RPM (12-pole motor), 35000RPM (14-pole motor).
Features:
ESC is specially designed for all kinds of industrial control electric tools such as air pump, water pump, oil pump and fan which use DC three-phase brushless motor. The default medium angle and long time high current work, Jianyi plus fan cold has overheat protection When the external heat dissipation condition of the ESC is poor, the temperature is automatically reduced when the temperature exceeds 100 degrees, and the temperature drops to 100 degrees to return to normal.
Interface Description:
-U V W phase line output is connected to the motor
-VCC GND main power supply (external DC power supply)
Instructions for use:
Standard power distribution positioner directly adjusts the speed without external signal. Clockwise increase and counterclockwise decrease. It is also suitable for external PLCO-5 analog quantity control, unplug the potentiometer cable, and external 0-5 analog quantity control The control signal and the ground wire are respectively connected to the input signal terminal of the brushless drive board, as long as two wires are required
Note:
-There is no fuse in the power supply circuit on the main board, it is recommended to add an external power supply.Reversed polarity will cause permanent damage to some chips on the board
-There is motor blocking protection during normal operation, due to the power of the module.The current is very large. Please do not artificially short-circuit when the module is not working normally.
Short circuit may burn the line and burst the tube. Please use small electricity for the first wiring test.Flow low voltage test, after test passes, then pass high current and high voltage to work
-Don't connect or connect which is obviously inconsistent with the voltage, current and power of the drive module.
Package include:
1pc x ESC M
Sản Phẩm Liên Quan
HOT
Bikini hàng Âu
₫ 400.000
HOT
Bikini Thái quả ngang chấm bi
₫ 350.000
HOT
Bikini made in Thailand
₫ 350.000
HOT
Bikini Thái
₫ 300.000
HOT
Bikini OKISS- QCXK
₫ 400.000
HOT
Bikini xuất Âu
₫ 300.000